Charge Battery Pack; Inserting The Batteries - Carson VW T1 Bus Manuel D'instructions

CHARGE BATTERY PACK

Charging via the transmitter
• Set the switches on the transmitter and vehicle to the "OFF"
position
• Open the ("CHARGING PORT") cover on the back of the transmit-
ter and take out the charging lead
• Connect the charging lead to the charging port on the underside
of the vehicle (observing the correct polarity)
• Set the "ON / OFF / Charge" switch on the transmitter to "Charge"
• Transmitter's charge indicator: LED shines RED- vehicle is being
charged / LED shines "BLUE" vehicle is fully charged
• On completion of the charging operation, remove the charging
lead from the vehicle
• Charging time: approx. 40 min.
Charging head
2

INSERTING THE BATTERIES

Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
Open the battery compartment on the back of the transmitter.
1
Vehicle charging lead
3
Insert the batteries 4x 1,5V LR06 (AA) in the battery compartment
with correct polarity.
15 // GB