Installation Diagram; Electrical Connections - Lippert 10857 Serie Mode D'emploi

7.1 INSTALLATION DIAGRAM

*minimum suggested clearance for the cable harness
This diagram shows the positions of the M6 studs from the top and front
surfaces, and it is mirrored on the other side of the unit. The holes on the
mounting plates must have the correct diameter for a M6 stud.
DESCRIPTION
A Front M6 stud
B Middle M6 stud
C Back M6 stud
D Tread reference surface plane

7.2 ELECTRICAL CONNECTIONS

The standard product includes a cable harness to connect the unit to the
electrical system:
• secure the cable to the chassis to keep it adherent to it so that it could
not be hit by objects and particles while the vehicle is moving, and
make sure that is far from heat sources that could cause a fire hazard.
8
FASTENING
M6 locking nut | 5Nm torque
M6 locking nut | 5Nm torque
M6 locking nut | 5Nm torque