Operating Modes; Dry Mode; Heat Mode - Dandy DPA080E3WDB-6 Manuel Du Propriétaire

OPERATING INSTRUCTIONS

OPERATING MODES

Cool Mode
• Press the mode button until the snowfl ake icon
appears on the display.
• Use the increase and decrease buttons to choose
the desired temperature.
• Use the fan button to choose the desired fan
speed.
• The temperature can be set within a range of 18
- 32°C (64 - 90°F).
• The exhaust hose should be installed during cool
mode to ensure the best results.

Dry Mode

• Press the mode button until the "dh" symbol
appears on the display.
• The fan speed will be set to auto.
• The exhaust hose should be installed during dry
mode to ensure the best results.
• It may be necessary to install the continuous
drain hose during dry mode to remove excess
water.
OPERATING MODES
Fan Mode
• Press the mode button until the fan icon appears
on the display.
• Press the fan button to choose the desired fan
speed: low, medium or high.
• The exhaust hose does not need to be installed
during fan mode.
• Fan mode can be used to run the fan without
engaging the cooling, heating or dehumidifying
functions.

Heat Mode

• Press the mode button until the sun icon appears
on the display.
• Use the increase and decrease buttons to choose
the desired temperature.
• Press the fan button to choose the desired fan
speed.
• The temperature can be set within a range of 13
- 27°C (55 - 81°F).
• The exhaust hose should be installed during heat
mode to ensure the best results.
• It may be necessary to install the continuous
drain hose during heat mode to remove excess
water.
• Heat mode is not available on all models.
11