Viking Range 5 Serie Guide D'installation page 6

SLIDE
CHANNEL
Flex Blower
shown
installed.
SUPPORT
LEG
All Installations:
4. Slide UPPER SUPPORT BRACKETS into SLIDE CHANNEL at
top left and right of unit.
Attach previously removed SUPPORT LEGS to downdraft
using one nut for each leg. Do not tighten nut completely
at this time.
UPPER
SUPPORT
BRACKET
Installations where ELECTRICAL PANEL needs to be
mounted in a remote location only:
5. Remove (4) HEX NUTS and ELECTRICAL PANEL. 5-ft.
extension cables (purchase separately) may be needed to
mount electrical panel in a remote location. Do not use more
that 2 extension cables. Do not mount electrical panel with
vent holes facing down.
Electrical Panel Dimensions
18-3/16" (46.2 cm)
17-7/16" (44.3 cm) Slot Center
16-1/4" (41.3 cm)
6
6-1/4"
(15.9 cm)
4-1/2"
(11.4 cm)
Slot Center
2-1/2"
(6.35 cm)