Table des Matières
Publicité
BRS-LC
13 Disposal
For the BRS-LC to be properly disposed of, it first must be dismounted. For disposal, observe the local regulations, laws,
provisions, standards and guidelines.
12 Dismounting on page EN-20
13.1 Materials
This product consists for the most part of plastics, steel and non-ferrous metals. Steel and non-ferrous metals can be molten
in steel and iron works and are thus almost infinitely recyclable. The plastic materials used are marked in preparation for
sorting and separation of the materials for later recycling.
13.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter sewage systems. These materials must be stored,
transported and disposed of in suitable containers. Observe the relevant local regulations and disposal instructions of the
safety data sheets specified by the manufacturer of the consumables. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the manufacturer of the
consumables.
13.3 Packaging
ABICOR BINZEL has reduced the packaging for shipping to a minimum. Packaging materials are always selected with
regard to their possible recycling ability.
BAL.0030 • 2019-01-18
All manuals and user guides at all-guides.com
13 Disposal
EN - 21
Publicité
Chapitres
Table des Matières
