Hartan Racer GTX Instructions page 11

Instructions
WARNING!
14
safety harness
Secure your child with the 5-point belt system 14.
Make sure that the shoulder belts d are inserted and the belt fits snugly
against your child. You can adjust the length and tautness of the belts with
the belt ends f. You can adjust the width of the shoulder and lap belts by
tilting open the quick-release slider g and pulling on the belt e.
opening the belt: Press the two buttons b at the same time and remove
the magnetic closer a. The bottom fixing c can then be removed easily.
closing the belt: Hold together the two fixings c and attach the magnetic
closer a; the fastener locks automatically.
Adjusting the footrest
By pressing the two red safety buttons 15 at the same time, the footrest
can be lowered. When lifting it, adjustment of positions is effected
automatically. The footrest can be lengthened. To do this, pull the two
red pins 16 and turn the footrest by 180°.
Automatic locking of the upper section
Place the seat frame on the chassis so that the two upper fastening
components rest on the locking bolts provided for this purpose. Both
sides of the lock mechanism 17 will automatically close when you press
the seat frame down.
WARNING!
Ensure that the seat frame is securely in place
before use!
To release the lock mechanism, press the safety button to the right of
the release button on the back of the inclining seat frame and then press
the release button until the release is activated.
Grasp the hoop guard with your other hand to remove the seat frame.
Adjust the back rest to incline the seat frame
Tilt the adjustment lever 13 at the rear to bring the seat frame from the
sitting to the lying position in two stages.
Sun and weather protection 16 on the canopy
Open the two brackets on the rear canopy hoop to extend the canopy
hoop forwards over the canopy
10