Micropilot NMR84
0 % value
Navigation
Prérequis
Description
Entrée
Réglage usine
Information
supplémentaire
100 % value
Navigation
Prérequis
Description
Entrée
Réglage usine
Information
supplémentaire
Input value %
Navigation
Prérequis
Description
Information
supplémentaire
Endress+Hauser
Setup → Advanced setup → Input/output → Analog I/O → 0 % value
Operating mode (→ 133) = 4..20mA output ou HART slave +4..20mA output
Value corresponding to an output current of 0% (4mA).
Nombre à virgule flottante avec signe
0 Unitless
Accès en lecture
Accès en écriture
Setup → Advanced setup → Input/output → Analog I/O → 100 % value
Operating mode (→ 133) = 4..20mA output ou HART slave +4..20mA output
Value corresponding to an output current of 100% (20mA).
Nombre à virgule flottante avec signe
0 Unitless
Accès en lecture
Accès en écriture
Setup → Advanced setup → Input/output → Analog I/O → Input value %
Operating mode (→ 133) = 4..20mA output ou HART slave +4..20mA output
Shows the output value as a percentage of the complete 4...20mA range.
Accès en lecture
Accès en écriture
Operator
Maintenance
Operator
Maintenance
Operator
-
Menu de configuration
137