Cancelling The Toasting Process; Toasting Frozen Bread; Warming Up Bread; Toasting One Bread Side/A Bagel - DS Produkte KS-2000D Mode D'emploi

1. Place the toaster on a dry, heat-resistant, fl at surface a suffi cient distance away from fl am-
mable objects. Please make sure that the toaster is not accessible to children.
2. Insert the mains plug into a properly installed and earthed 230 V mains socket with earth-
ing contacts.
3. Insert a slice of bread into each of the toasting slots. Do not use slices which are too thick.
The bread must not become wedged.
4. Use the rotary knob to set the desired toasting setting between level 1 (light toasting; very
light degree of browning) and stage 6 (strong toasting; very strong degree of browning).
Please note: If you use the device over a prolonged period, the slices which are
put into the device later on will be darker than the fi rst slices when the same
toasting setting is used.
5. Press down the lowering lever until it engages audibly. (The lowering lever only clicks into
place if the device is connected to a power socket.) The bread is lowered and the device
switched on. During toasting the CANCEL button lights up.
6. If necessary, select the BAGEL (toasting one bread side/a bagel), DEFROST or
REHEAT functions (see the "Toasting one bread side/a bagel", "Toasting Frozen Bread"
and "Warming up Bread" sections).
7. After the end of the toasting process, the bread and the lowering lever are automatically
raised and the device switches itself off. The CANCEL button goes off. You can manually
interrupt the toasting process at any time by pressing the CANCEL button.
8. Remove the bread carefully from the toasting slot. As you do this, do not touch the
hot metal surfaces in the area of the toasting slots! There is a danger of burns!
With small bread slices, the lowering lever can also be used to lift out the toast. Push
the lever all the way up to facilitate removing the bread slices.

Cancelling the Toasting Process

As soon as the toasting process has started, the CANCEL button lights up. Press this button to
cancel the toasting process prematurely. The bread is raised and the CANCEL button goes off.

Toasting Frozen Bread

Set the desired degree of toasting. Place the frozen bread in the toasting slots and press down
the lowering lever. Then press the DEFROST button. If the defrost function is enabled, the
DEFROST button lights up and the toasting process is extended.

Warming Up Bread

If you want to warm up bread that has already cooled down, insert the bread, press down
the lowering lever and then immediately press the REHEAT button after the lowering lever
has clicked into place. The REHEAT button lights up and the toasting process is shortened.

Toasting one bread side/a bagel

If you would like to toast just one side of the bread or a bagel, press the BAGEL button im-
mediately after the lever has been pushed down and has locked into place. Only the middle
heating elements will be activated, the external elements stay cold. The lights of the BAGEL
and CANCEL buttons are on during the toasting process.
08217_DE-GB-FR-NL_V2.indb 18
All manuals and user guides at all-guides.com
18
23.01.2013 12:14:22