Mitsubishi Electric a Serie Manuel page 27

α
2 Simple Application Controllers
3.2 DIN RAIL Mounting of Main Unit
Units can be snap mounted to 35mm DIN rail (DIN EN 50022). To release pull the spring
loaded clips away from the rail and slide the unit off and up.
3.2.1 Installation
Figure 3.2: Installation
‚
3.2.2 Remove
Figure 3.3: Remove
‚
Align the upper side of the
DIN rail ( ) and push it onto the rail ( ).

Pull the DIN rail hook ( ) and remove the

α
2 DIN rail mounting groove with the
α
2 series main unit( )
ENG-15
Installation 3
ENG