Mitsubishi Electric a Serie Manuel page 102

α
2 Simple Application Controllers
Table 14.4: Function Block Lists
Function Block
Name Symbol
Connect _B
System
Out
Outputs
*1 Number of bytes used = 19 + 1 × (Characters in equation)
*2 Number of bytes used = 8 + 4 × (Number of time switches)
*3 Number of bytes used is decided by the displayed item.
Table 14.5:Displayed Item and number of bytes used
Characters
Analog, FB value
Time, Date
Time Switch
*4 Number of bytes used = 30 + 1 × (Characters in equation)
*5 Number of bytes used = 12 + 1 × (Characters in E-Mail address)
*6 Number of bytes used = 32 + 3 × (Number of screen)
*7 Number of bytes used = 37 + (Number of characters of setup commands)
Memory
Consumption
(Byte)
This CONNECT function block is an
internal FB used to show the memory
used by the system bits, the bits for
AS-interface, and the operation keys.
No function block appears on screen
10
or shows as being used in the
"Memory Configuration Usage"
dialog box, the purpose is only to
calculate the memory that is used by
the bits listed above.
Control external device through
10
relays and transistors.
Displayed Item
Value
Graph
Key, System Bit and Function Block Lists 14
Description
Number of bytes,
×
16 + 1 (Each character displayed)
AL2-14MR-*
AL2-10MR-*
AL2-24MR-*
α
2 Series
17
23
14
17
ENG-90