Instruction Manual / International Warranty - Hindenberg 190-H Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, unscrew the crown by turning it counter-clockwise
and wind it at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc. while
the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3 am. Please
press the button on your watch slowly and carefully to avoid damaging the mecha-
nism. When the warranty of your watch expires, we recommend you to send it in for a
revision to ensure its longevity. A revision should optimally be conducted once a year
to counteract general wearout and to maintain the water-resistance of your watch.
SETTING THE DATE AND THE DAY OF THE WEEK
Pull the crown carefully out to position 2 (two clicks) and set the hands outside the zone
mentioned before, e.g. at 6:00. Push the crown back to position 1 (one click position) and
turn it clockwise to the date required. Turn the crown counter-clockwise until the right day is
displayed.
SETTING THE YEAR AND MONTH
Press the adjustment pusher A until the right month is displayed (1-12). Press the adjustment
Vintage Aviator
pusher B until the required year is displayed The date/month must be set manually at the end
Model-No.: 190-H
of the month.
Automatic mouvement
SETTING THE TIME
Calibre H-09.110
Pull the crown carefully out to position 2. Turn the crown in either direction to set the hands
20 jewels
on the time required. Then press the crown back in.
5