Instruction Manual / International Warranty - Hindenberg Skyray 420-H Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, unscrew the crown by turning it counter-clockwise
and wind it at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month/year/day
etc. while the hands are between 8pm and 4 am. Please press the button on your watch
slowly and carefully to avoid damaging the mechanism. When the warranty of your
watch expires, we recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract general wearout and
to maintain the water-resistance of your watch.
SETTING THE YEAR AND THE MONTH
Pull the crown carefully out to position 1 (one click) and set the hands outside the zone
mentioned before, e.g. at 6:00 pm. Unscrew the crown of the pushers A and B by turning them
counterclockwise. Press the adjustment pusher A until the right month is displayed. Press the
adjustment pusher B until the required year is displayed.
SETTING THE DAY OF THE WEEK AND THE DATE
Unscrew the crown of the pushers C and D by turning them counterclockwise. Press the adjust-
Skyray
ment pusher C until the right date is displayed (1 – 31). Press the adjustment pusher D until the
required day is displayed. The date/month must be set manually at the end of the month.
Model-No.: 420-H
Automatic mouvement
SETTING THE TIME
Calibre H-16.420
Pull the crown carefully out to position 1. Turn the crown to set the hands on
20 jewels
the time required. Then press the crown back in and bolt it by turning it clockwise.
5