Instruction Manual / International Warranty - Hindenberg Skeleton Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, wind the crown at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc.
while the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3am.
Please press the button on your watch slowly and carefully to avoid damaging the
mechanism. When the warranty of your watch expires, we recommend you to send
it in for a revision to ensure its longevity. A revision should optimally be conducted
once a year to counteract general wearout and to maintain the water-resistance of
your watch.
SETTING THE DATE AND MONTH
Pull the crown carefully out to position 1 (one clicks) and set the hands outside the zone
mentioned before, e.g. at 6:00. Press the adjustment pusher A until the required month is
displayed (1 -12). Press the adjustment pusher B until the right day is displayed (1 -31). The
date/month must be set manually at the end of the month.
SETTING THE DAY OF THE WEEK
Skeleton
Press the adjustment pusher C with a pointed tool until the right day is displayed.
Model-No.: 150-H
SETTING THE TIME
Automatic mouvement
Pull the crown carefully out to position 1. Turn the crown in either direction to set the
Calibre H-09.150
hands on the time required. The indicator in the middle (1 – 24) is the 24 hour display.
35 jewels
Then press the crown back in.
5