Instruction Manual / International Warranty - Hindenberg Expeditor Mode D'emploi

Expeditor
Model-No.: 370-H
Automatic mouvement
Calibre H-10.230-I
20 jewels
INITIAL SETTING
When setting the watch for the first time, unscrew the crown by turning it counter-clockwi-
se and wind it at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc.
while the hands are between 9pm (21:00) and 4 am. Please press the button on your
watch slowly and carefully to avoid damaging the mechanism. When the warranty of
your watch expires, we recommend you to send it in for a revision to ensure its lon-
gevity. A revision should optimally be conducted once a year to counteract general
wearout and to maintain the water-resistance of your watch.
SETTING THE YEAR AND THE MONTH
Pull the crown carefully out to position 1 (one click) and set the hands outside the zone
mentioned before, e.g. at 6:00 pm. Press the adjustment pusher A until the right month is
displayed. Press the adjustment pusher B until the required year is displayed.
SETTING THE DAY OF THE WEEK AND THE DATE
Press the adjustment pusher C until the right date is displayed (1 – 31). Press the adjust-
ment pusher D until the required day is displayed. The date/month must be set manually
at the end of the month.
SETTING THE TIME
Pull the crown carefully out to position 1. Turn the crown to set the hands on
the time required. Then press the crown back in.
5
Instruction Manual