Initial Setting; Instruction Manual / International Warranty - Hindenberg Air Classic Mode D'emploi

Instruction Manual

INITIAL SETTING

When setting the watch for the first time, unscrew the crown by turning it counter-clockwise
and wind it at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc. while
the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3 am. Please
press the button on your watch slowly and carefully to avoid damaging the mecha-
nism. When the warranty of your watch expires, we recommend you to send it in for a
revision to ensure its longevity. A revision should optimally be conducted once a year
to counteract general wearout and to maintain the water-resistance of your watch.
SETTING THE YEAR AND THE MONTH
Pull the crown carefully out to position 1 (one click) and set the hands outside the zone
mentioned before, e.g. at 6:00. Press the adjustment pusher A until the right month is dis-
played. Press the adjustment pusher B until the required year is displayed.
SETTING THE DAY OF THE WEEK AND THE DATE
Press the adjustment pusher C until the right date is displayed (1 – 31). Press the adjustment
pusher D until the required day is displayed. The date/month must be set manually at the
Air Classic
end of the month.
Model-No.: 260-H
Automatic mouvement
SETTING THE TIME
Calibre H-11.220
Pull the crown carefully out to position 1. Turn the crown in either direction to set the cur-
20 jewels
rent time. Then press the crown back in and bolt it by turning it clockwise.
5