Instruction Manual / International Warranty - Hindenberg Air Professional 230-H Mode D'emploi

Air Professional
Model-No.: 230-H
Automatic mouvement
Calibre H-10.230-I
20 jewels
INITIAL SETTING
When setting the watch for the first time, wind the crown at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc.
while the hands are between 9pm (21:00) and 4 am. Please press the button on
your watch slowly and carefully to avoid damaging the mechanism. When the
warranty of your watch expires, we recommend you to send it in for a revision
to ensure its longevity. A revision should optimally be conducted once a year to
counteract general wearout and to maintain the water-resistance of your watch.
SETTING THE YEAR AND THE MONTH
Pull the crown carefully out to position 1 (one click) and set the hands outside the zone
mentioned before, e.g. at 6:00 pm. Press the adjustment pusher A until the right month
is displayed. Press the adjustment pusher B until the required year is displayed.
SETTING THE DAY OF THE WEEK AND THE DATE
Press the adjustment pusher C until the right date is displayed (1 – 31). Press the
adjustment pusher D until the required day is displayed. The date/month must be set
manually at the end of the month.
SETTING THE TIME
Pull the crown carefully out to position 1. Turn the crown to set the hands on
the time required. Then press the crown back in.
5
Instruction Manual