Hindenberg 190-H Mode D'emploi page 4

Hindenberg
We would like to congratulate you on having chosen a self-winding automatic watch HINDENBERG. Your HINDENBERG
watch has undergone a number of quality control and accuracy tests before leaving our workshops and being transferred to
the selective HINDENBERG authorized distribution network. To ensure that your HINDENBERG watch functions perfectly for
many years, here is some advice from our master watchmakers:
A watch with a self-winding mechanical movement is automatically wound by its wearer's everyday wrist movements. Becau-
se of this, the watchband must be correctly fitted to the wearer's wrist. If the watchband is too loose, the watch may lose
some of its autonomy, and therefore its precision. To keep your watch optimally wound, wear it at least 12 hours every day.
Before wearing your watch, you must wind it manually by turning the crown clockwise approximately 40-50 turns. After
wearing your watch for several hours, depending on your activity level, the watch will be perfectly wound. If the watch stops
(e.g. if it has not been worn for some time or during periods of low activity), it should be wound manually.
The name HINDENBERG guarantees a quality watch movement of the greatest precision. The average deviation of a HIN-
DENBERG automatic watch should not exceed -5 to +30 seconds per day.
Wear your mechanical watch regularly to ensure that the lubricating oil in the movement remains fluid. Do not leave your
watch anywhere where it might be subjected to major variations in temperature or humidity (e.g.bathroom, sauna) in direct
sunlight or near strong magnetic fields such as loudspeakers, refrigerators, mobile phones, etc.
4