Environmental Safety; Electrical Installation - Xylem JABSCO ParMax 1 Plus Manuel

Condition
Chemicals or
hazardous fluids
in eyes
Chemicals or
hazardous fluids
on skin

Environmental safety

The work area
Always keep the station clean
Waste and emissions regulations
Observe these safety regulations regarding waste and emissions:
• Appropriately dispose of all waste
• Handle and dispose of the processed liquid in compliance with applicable
environmental regulations
• Clean up all spills in accordance with safety and environmental procedures
• Report all environmental emissions to the appropriate authorities
WARNING: Radiation Hazard. Do NOT send the product to Xylem if it has
been exposed to any nuclear radiation

Electrical installation

For electrical installation recycling requirements, consult your local electric utility
Recycling guidelines
Always follow local laws and regulations regarding recycling
WARNING: It is critical that chemical compatibility between the pump and the
liquid media be verified by the user before installation and use in the equipment.
Chemical incompatibility may cause premature failure and may result in leakage.
Always read the manufacturers literature before you use fluid or solvent in the pump.
Action
1. Hold your eyelids apart forcibly with your fingers
2. Rinse the eyes with eyewash or running water for al least
15 minutes
3. Seek medical attention
1. Remove contaminated clothing
2. Wash the skin with soap and water for a least 1 minute
3. Seek medical attention, if necessary
5