Switching The Stop+Go Function On And Off; Using The Automatic Warm-Up Function - AEG 88101K Instructions De Montage Et Mode D'emploi

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
To switch
on
To switch
off
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field

Using the automatic warm-up function

All cooking zones are equpped with an automatic warm up function
When setting a heat setting using
ing zone switches to full power for a certain amount of time and then
automatically switches back to the heat setting set.
Switch on
(only when starting at
¾
)
Switch off
Not used
3
If during the automatic warm up
e.g. from
3
If there is still residual heat on the cooking zone (display
matic warm up is not performed.
10
All manuals and user guides at all-guides.com
Control panel
Touch STOP+GO
Touch STOP+GO
Control
panel
Touch
Touch
Touch
Á Ã
to , the automatic warm up is adjusted.
Display
u
heat setting that was previ-
ously set (not automatic
warm up function)
, when starting from
possible
heat set-
tings
¿ Æ
to
Æ ¿
/ u
to
Ç u
to
a
a higher heat setting is selected,
.
¾
, the cook-
Display
a
(after 5 sec-
onds)
Æ u
to
Ç u
to
h
), the auto-