Beyerdynamic Headzone Home Notice D'utilisation page 51

Problem
When turning on the
Headzone ® Home system, the
settings do not correspond to
the settings stored when the
system was turned off last.
Possible cause
• As described in this manual,
Headzone ® Home will store
all settings automatically.
Seldom, it can occur that
the device is turned off
during storing or that it is
turned off before all
settings are stored.
• Volume settings that
exceed 2/3 of the control
range are not stored to
avoid extreme volume
level when turning on
Headzone ® Home again.
- 51 -
Solution
• After having changed some
Headzone ® Home settings
wait at least 3 seconds
before you turn off the
device. When all settings
are set to "0" after turning
Headzone Home on,
®
restore the factory
settings as described at the
beginning of this chapter.
• Set the volume to the
desired level.