Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
2.
replacement.
3.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Volts Direct Current
Impacts per Minute Under Load
(IPM)
Properly Recycle Nickel Cadmium
Batteries
Underwriters Laboratories, Inc.
1.
Drive shank
2.
Forward/Reverse switch
3.
Trigger
4.
Battery pack
5.
Battery pack release buttons
6.
Quick change chuck (Cat. No. 9099-20)
7.
Tool hanger (Cat. No. 9099-20)
8.
Tool hanger ring (Cat. No. 9099-20)
Cat. No. 9099-20
7
6
All manuals and user guides at all-guides.com
SPECIFIC SAFETY RULES - CORDLESS IMPACT WRENCH
FUNCTIONAL DESCRIPTION
Cat. No. 9078-20
8
1
No Load
Catalog
Volts
DC
RPM
No.
18
0 - 1350
9078-20
9079-20
18
0 - 1400
0 - 1400
9099-20
18
* Output rated at full speed
Quick Change Chuck Capacities*
Catalog
Quick Change
No.
Auger Bits
9079-20
1-1/2"
9099-20
1-1/2"
* Only for use with the 7/16" Hex Quick
Change chuck, standard equipment on
the 9099-20, optional accessory
(Cat. No. 48-66-0061) on other models.
1
2
3
4
Specifications
Impacts
Drive
Per
Minute
Shank
0 - 2150
3/4"
1/2"
0 - 2200
7/16" Hex
0 - 2200
Selfeed
Bits
2-9/16"
2-9/16"
Cat. No. 9079-20
Average
Torque
Output*
325 ft-lbs.*
240 ft-lbs.*
270 ft-lbs.*
5
page 3
Publicité
Table des Matières
