Gardena SelectControl 1885 Mode D'emploi page 127

1885-20.960.01_11.11.2013_GARDENA.QXP 13.11.2013 10:37 Seite 127
24h 2nd
1x 2x 3x
Important information :
Sensor control :
Sensor
All manuals and user guides at all-guides.com
13. Press OK button.
14. Keep pressing the
frequency is set (example: 2x = twice in 24 hours).
15. Press OK button.
3rd 7th
The watering cycle is stored.
If the subsequent day is not a watering day, the watering will
stop at 12:00 a.m.
During sensor control, watering takes place only between
8.00 p.m. and 6.00 a.m. if the sensor registers dry (sensor
There is a minimum break of 2 hours after watering. No watering
is performed or an ongoing watering process is cancelled if the
sensor indicates moist (sensor
1. Turn the rotary knob to Sensor.
and the current watering duration flash (preset to
30 minutes at the factory) for 10 seconds in the display.
2. Whilst the watering duration is flashing, it can be adjusted with
+
the
confirmed with the OK button.
and the current watering frequency flash.
+ button until the required watering
).
button (between 1 and 59 minutes) (e.g.: 15 minutes) and
).
127