Gardena SelectControl 1885 Mode D'emploi page 119

1885-20.960.01_11.11.2013_GARDENA.QXP 13.11.2013 10:37 Seite 119
4. Putting Your Water Computer into Operation
Insert battery:
(Optional)
Select between light
to sandy or medium
to heavy soils :
All manuals and user guides at all-guides.com
The Water Computer must only be operated with a 9 V alkali-
manganese (alkaline) battery type IEC 6LR61.
1. Remove controller
housing of the Water Computer.
2. Insert battery in the battery
compartment
correct polarity
The display shows all LCD
A
symbols for 2 seconds
the time in hours then flash
(see 5. Programming).
3. Install controller
housing again.
If the OK button is pressed whilst the battery is inserted, the soil
can be selected after all LCD symbols have been displayed. (see
5. Programming). Medium to heavy soils is selected as standard
if the OK button is not pressed when inserting the battery.
1 = Medium to heavy soils.
2 = Light to sandy soils.
A
from the
B
. Observe
z
.
P
and
A
on the
B z
P
119