Protecting The Environment; Replacing The Filters - Black & Decker BHFEA420J Traduction De La Notice D'instructions Originale

ENGLISH
Use your index finger and thumb to pinch the filter
u
housing tabs and pull the filter housing (6) from the
dust canister as shown in figure G.
Place the dust canister over a trash can and empty the
u
dust canister as illustrated in figure H.
Remove the foam filter (6a) from the filter housing as
u
shown in figure I.
Shake or lightly brush any loose dust off of the foam
u
filter (6a) and filter (6).
Rinse out the dust canister (5) with warm soapy water.
u
Wash the filters with warm soapy water.
u
Ensure the filters are completely dry before refitting the
u
filters into the filter housing.
Refit the clean and dry foam filter (6a) into the filter
u
housing (6).
Install the filter housing into the dust canister (5).
u
Install the dust canister onto the vacuum, until it "clicks"
u
firmly into position.
Removing and cleaning the beater bar
(Fig. J, K)
Warning! To reduce the risk of injury from moving parts,
disconnect the floor head and extension tube from the vacuum
before cleaning or servicing.
To remove the beater bar (9b) from the floor head (9) Slide
u
the beater bar release button (9a) to the rear of the unit.
The beater bar (9b) can now be removed and cleaned.
u
Safe storage (Fig. L)
The unit can be safely stored, when not in use, by placing the
catch on the rear of the motor unit onto the storage station
(13) as shown in figure L.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.

Replacing the filters

The filters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement filters are available from
your BLACK+DECKER dealer.
8
(Original instructions)
Remove the old filters as described above.
u
Fit the new filters as described above.
u

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
BHFEA420J
Voltage
Watt Hours
Approx Charge Times
Weight
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black&Decker Terms and Conditions and you will need to
submit proof of purchase to the seller or an authorised repair
agent. Terms and conditions of the Black&Decker 2 year guar-
antee and the location of your nearest authorised repair agent
can be obtained on the Internet at www.2helpU.com, or
by contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
BHFEA515J BHFEA520J
14.4v 18v
28.8Wh 27Wh
5 hours 4 hours 5 hours
2.56KG 2.61 2.62KG
18v
36Wh