Cleaning The Hepa Hygiene Filter; Inserting The Exhaust Filter - Bosch BGL6 Notice D'utilisation

en Cleaning and servicing
Note: The filtering effect of the ex-
haust filter is retained, even if the fil-
ter surface becomes discoloured.
Cleaning the filter fleece
The filter fleece, with the filter grid, is
attached to the exhaust grille.
Requirement: The exhaust filter has
been removed.
→ "Removing the exhaust filter",
Page 35
Remove the filter fleece.
1.
→ Fig.
27
Tap out the filter fleece.
2.
If the filter fleece is very dirty, rinse
3.
it.
→ Fig.
28
Leave the filter fleece to dry for at
4.
least 24 hours.
Place the filter fleece on the ex-
5.
haust grille.
Insert the filter grid.
6.
→ "Inserting the exhaust filter",
Page 36

Cleaning the HEPA hygiene filter

The HEPA hygiene filter consists of a
filter unit.
Tip: To clean the filter unit thor-
oughly, you can clean the filter unit in
the washing machine. To protect the
rest of the laundry, place the filter
unit in a laundry bag. Wash the filter
unit at 30 °C using a gentle pro-
gramme and the lowest spin speed.
Requirement: The exhaust filter has
been removed.
→ "Removing the exhaust filter",
Page 35
Tap out the filter unit.
1.
Rinse the filter unit under running
2.
water.
→ Fig.
29
1
Depending on the appliance specifications
36
All manuals and user guides at all-guides.com
Leave the filter unit to dry for at
3.
least 24 hours.
Insert the filter unit into the appli-
4.
ance.
→ "Inserting the exhaust filter",
Page 36

Inserting the exhaust filter

Requirement: The lid is open.
→ "Opening the lid", Page 34
Place the exhaust filter on the ex-
1.
haust grille so that it clicks audibly
into place.
→ Fig.
30
→ "Closing the lid", Page 34
2.
1