Overview; Installation; Overhead Rigging - EuroLite AC-300 DMX LED/RGB Air-Effect Mode D'emploi

Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

OVERVIEW

(1) LEDs
(2) Ventilation fan
(3) Velcro-belt for attaching the cone cloth
(4) Mode switch
(5) Dipswitches
(6) Rotary speed control
(7) DMX IN
(8) DMX OUT

INSTALLATION

Install the device out of the public area.
If the device is to be installed overhead, the following safety instructions are binding:

Overhead rigging

Please consider the EN 60598-2-17and the respective national norms during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
All manuals and user guides at all-guides.com
DANGER TO LIFE!
17/41 51116120_V_1_1.DOC