Dmx-Protocol; Cleaning And Maintenance - EuroLite AC-300 DMX LED/RGB Air-Effect Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DMX-protocol

Channel 1 - Modi
Mode 1
Characteristic
0 - 63
RGB control
Mode 2
Characteristic
64 – 127
7 color fade
Mode 3
Characteristic
128 – 191
7 color change
Mode 4
Characteristic
192 – 255
3 color change
Channel 2 – „R" and Speed
Channel 3 – „G"
Channel 4 – „B"
Channel 5 – Sound Control
DMX Value Characteristic:
0 – 10
No function
11 – 100
Automatic
101 – 150
No function
151 - 255
Sound control with sensitivity control
Note: If the „No funtion" DMX value under channel 5 is chosen, then the rest of the channels function
properly; if Automatic or Sound control is selected, then the other channel settings will not run.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
All manuals and user guides at all-guides.com
DANGER TO LIFE!
21/41
51116120_V_1_1.DOC

Publicité

Table des Matières
loading

Table des Matières