Overview; Installation; Installing/Replacing The Lamp - EuroLite ML-56 ZOOM CDM Spot Mode D'emploi

If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

OVERVIEW

Professional theatre spot
Spot with 2 built-in lenses (Wave/Stippled, Wave/Clear) • Manual focus for directed light • Light output of a
convetional PAR 56 spot with less power consumption (190 W) • High-quality die-cast housing for highest
stability • With colour-filter frame • Optional barndoors • With built-in ballast resistor for extremely powerful
CDM-T lamp • Ideal for theatres, large stages and mobile use

INSTALLATION

Installing/Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
15/34
(1) Mounting-bracket
(2) Ballast resistor
(3) Housing
(4) Attachment eyelet
(5) Fixation screw
(6) ZOOM knob (focus)
(7) Colour filter frame retaining clip
(8) Clip-to-hold clamps
41600132_V_1_0.DOC