Table Des Matières; Meanings Of Symbols - Tanaka THT-210B Instructions De Sécurité Et Mode D'emploi

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Contents
WHAT IS WHAT? ................................................... 3
WARNINGS AND SAFETY INSTRUCTIONS ......... 4
SPECIFICATIONS .................................................. 6
ASSEMBLY PROCEDURES .................................. 8
OPERATING PROCEDURES ................................. 8
MAINTENANCE ................................................... 10
2
Symbols
WARNING
The following show symbols used for the machine. Be sure that you
understand their meaning before use.
It is important that you read, fully understand and observe the following safety
precautions and warnings. Careless or improper use of the unit may cause
serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on
the unit.
Always wear eye, head and ear protectors when using this unit.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".