Maintenance And Daily Cleaning - Bosch TES 503 Serie Mode D'emploi

12
3. Turn the rotary selector (6d) to "Warm
i
milk" or "Milk froth"
h
4. Press the button (11).
h
The button (11) flashes and the
appliance now heats up for approx.
20 seconds. The display then shows
Pull milk frother
5. Pull the milk frother (6) to open it.
¡
Risk of burns!
Milk froth or warm milk comes out of the
milk frother (6) at high pressure. Splashes
of milk can scald. Do not touch the outlet
(6a) or aim it at anyone.
6. Close milk frother (6) by pushing it in.
Tip: For optimal milk froth quality, use cold
milk with a fat content of at least 1.5 % if
possible.
Important: Dried milk residue is difficult
to remove, so the milk frother (6) must be
cleaned with lukewarm water immediately
after use and rinse using the
system programme.
Robert Bosch Hausgeräte GmbH
All manuals and user guides at all-guides.com
j
.
.
Rinse milk
Maintenance and
daily cleaning
¡
Risk of electric shock!
Unplug the appliance before cleaning it.
Never immerse the appliance in water.
Do not use a steam cleaner.
● Wipe the outside of the appliance with a
soft, damp cloth.
● Do not use abrasive cloths or cleaning
agents.
● Always remove any limescale, coffee,
milk or descaling fluid residue immedi-
ately. Such residue can cause corrosion.
● New sponge cloths may contain salts.
Salts can cause rust film on stainless
steel and must therefore be washed out
thoroughly before use.
● Pull the drip tray (8c) with the coffee
grounds container (8b) forward and out.
Remove the panel (8a) and the grate
(8d). Empty and clean the drip tray and
coffee grounds container.
● Remove drawer (4) and clean.
en