Bosch GOP 12V-28 Professional Notice Originale page 9

All manuals and user guides at all-guides.com
OBJ_BUCH-3037-001.book Page 9 Tuesday, January 17, 2017 3:05 PM
Accessory
HM-Riff delta plate Mortar,
HM-Riff grout and
mortar remover
HCS multi blade
Scraper, rigid
Scraper, flexible
BIM serrated seg-
ment saw blade
HM-Riff sanding
finger
HM-Riff plunge cut
saw blade
HCS universal
joint cutter
Inserting
Mount the requested application tool/accessory (e.g. plunge
cut saw blade 10) in such a manner on the tool holder 7 that
the offset faces downward (see illustration on the graphics
page; marking on the application tool/accessory is readable
from above).
Turn the application tool/accessory to a position favourable
for the respective job, and allow it to engage into the cams of
the tool holder 7. 12 different positions are possible, each
offset by 30°.
Use the screw 11 to fasten the application tool/accessory.
Tightly fasten the screw 11 with the hex key 12.
Bosch Power Tools
Material Application
Rasping and sanding on hard surfaces;
Concrete residues, example: removing mortar or tile adhesive (e.g. when
Wood, replacing damaged tiles), removing carpet adhesive
Abrasive materials residues
Mortar, Routing and cutting joint and tile material and rasping
Joints, and sanding on hard surfaces;
Epoxy resin, example: removing tile adhesive and grout
Glass fibre reinforced plastics,
Abrasive materials
Roofing felt, Fast, precise cutting of soft material and flexible abra-
Carpets, sive materials;
Artificial turf, example: cutting carpets, cardboard, PVC flooring,
Cardboard, roofing felt, etc.
PVC flooring
Carpets, Scraping on hard surfaces;
Mortar, example: removing mortar, tile adhesive, concrete and
Concrete,
carpet adhesive residues
Tile adhesive
Carpet adhesive, Flexible scraping on soft surfaces;
Paint residues, example: removing silicone joints, carpet adhesive and
Silicone paint residues
Insulation material, Precise cutting of soft materials;
Insulation panels, example: cutting insulation panels to size, flush cutting
Floor panels, protruding insulation material to length
Sound-dampening floor panels,
Cardboard,
Carpets,
Rubber,
Leather
Wood, Sanding wood or paint in hard to reach areas without
Paint sanding paper;
example: sanding off paint between shutter louvres,
sanding wooden floors in corners
Fibreglass, Plunge cuts in severely abrasive materials;
Mortar, example: routing thin mosaic tiles
Wood
Expansion joints, Cutting and separating soft materials;
Putty, example: cutting silicone expansion joints or putty
Insulation materials (rock
wool)
 Check the tight seating of the application tool/acces-
sory. Incorrect or not securely fastened application tools/
accessories can come loose during operation and pose a
hazard.
Removing
For removing the application tool/accessory, loosen the
screw 11 with the hex key 12 and remove the application
tool/accessory.
English | 9
1 609 92A 2TY | (17.1.17)