Technical Data; Assembly And Operation - Worx WX437L Mode D'emploi

7. BASE PLATE
8. LOWER BLADE GUARD
9. SPINDLE LOCK BUTTON
10. VACUUM ADAPTER
11. DEPTH ADJUSTMENT LEVER
12. PARALLEL GUIDE
13. SAW BLADE*
14. INNER FLANGE
15. BLADE BOLT
16. BEVEL ADJUSTMENT LEVER
17. DUST EXTRACTION OUTLET
18. PARALLEL GUIDE CLAMPING FIXTURE
19. OUTER FLANGE
20. LASER GUIDE
21. LASER ON-OFF SWITCH (SEE FIG. D1)
22. LASER BATTERIES (TWO) (SEE FIG. E2)
Not all the accessories illustrated or described are
included in standard delivery.

TECHNICAL DATA

Type Designation WX437L WX437L.X (4 - designation
of machinery, representative of circular saw)
Voltage
Rated current
No load speed (MAX.)
Rated speed(n)
Spindle thread size
Blade size
TCT Blade (RW8988)
HCS Blade *
Abrasive cutting blade *
Compact Circular Saw With Laser
WX437L WX437L.X**
110-120V~60Hz
6.5 A
4700/min
4700/min
M6
4-1/2"(115 mm)
X3/8"(9.5mm) X 24T
4-1/2"(115 mm)
X3/8"(9.5mm) X 60T
4-1/2"(115 mm)
X3/8"(9.5mm) X 60G
Cutting capacity
Cutting Depth at 90°
Cutting Depth at 45°
Bevel capacity
Arbor size
Laser battery model no.
Protection class
Machine weight
* Not all the accessories illustrated or described are
included in standard delivery.
** X may be followed by one or two characters. All
models are the same except model number and
trademark. The suffix in models may be number from
"1" to "999" or English letter "A" to "Z" or "M1" to" M9"
which means different package or the various of
accessories packed in the package.
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
INTENDED USE:
The tool is intended for ripping and cross-cutting wood
and other materials in straight cutting lines, while resting
firmly on the work piece.

ASSEMBLY AND OPERATION

Action
Mounting and Removing the Blade
NOTE: Lock or loose the blade bolt,
the spindle lock button should be
pressed.
WARNING: Always remove
the battery before changing
the blade!
Safety switch and On/Off trigger
WARNING: To avoid cutting
injury from the sharp blade,
please don't put your hands around
the Base Plate.
NOTE: Keep the dust adapter
connected to dust collecting device
when using the tool.
1-37/64" (40 mm)
1-1/32" (26 mm)
0-45°
3/8˝ (9.5 mm)
LR44 1.5V
/II
4.8 lbs (2.2 kg)
Figure
See Fig. A
See Fig. B
EN
13