Connections; Operating Data; Electric Data - LEGRAND IME CONTO D2 Mode D'emploi

63A single-phase energy meter,
MID direct connection

5. CONNECTIONS

Wiring diagrams:
N
L
N
Terminal board marking and diagram combination:
T1 / T2 RS485
E
SG
1 C
+ –
12 / 24V d.c.
Technical data sheet: IDP000193EN_06
MBUS OUTPUT
A B
Max. 30V 50mA
Updated: 13/04/2021
Codes: CE2DF30PMID – CE2DF3DTMID – CE2DF3MTMID
Model: CONTO D2

6. OPERATING DATA

6.1 ELECTRIC DATA

Currents:
- Reference current, I : 10A
ref
- Minimum current, I : 0,5A
min
- Maximum current, I : 63A
max
- Starting current, I : 0,04A
st
Rated voltages:
- Single-phase rated voltage Un: 230V ±15%
Rated frequency:
- F : 50Hz; 60Hz
n
- Permitted variation: 49...51Hz; 59...61Hz
Connectable section:
- Copper wires
- Voltage connection terminals, neutral:
Without bush
Rigid wire 1 x 0,75 ÷ 16 mm²
Flexible wire 1 x 0,75 ÷ 16 mm²
- Terminal boards in the upper part of the meter (input, impulse
output and bus):
Without bush
Rigid wire 1 x 0,2 ÷ 1,5 mm²
Flexible wire 1 x 0,2 ÷ 1 mm²
:
Necessary tools
- For the voltage connection terminals, neutral: screwdriver
with 6mm blade or Pozidriv No. 2
- For the terminal boards in the upper part of the meter (input,
impulse output and bus): screws with 2.5mm blade
Created: 18/03/2019
With bush
-
1 x 4 ÷ 10 mm²
(∅ 5mm)
With bush
-
1 x 0,2 ÷ 1 mm²
2 | 7