Special Safety Precautions; Power Source - Techness RUN1000 Mode D'emploi

All manuals and user guides at all-guides.com

Special Safety Precautions

●Power source:
●Choose a place in reach of a socket when placing the treadmill.
●Always connect the appliance to a socket with a grounded circuit and no other
appliances connected to it. It is recommended not to use any extension cords.
●A faulty grounding of the appliance can cause the risk of electrical shocks. Ask a
qualified electrician to check the socket in case you do not know if the appliance is
grounded appropriately. do not modify the plug provided with the appliance if it is not
compatible with your socket. ask a qualified electrician to install a suitable socket.
●Sudden voltage fluctuations can seriously damage the treadmill. Weather changes or
switching on and off other appliances can cause peak voltages, over-voltage or
interference voltage. To limit the danger of damage to the treadmill, it should be equipped
with an over-voltage protective device (not included).
●Keep power cord away from the carrying roller. Do not leave the power cord below the
striding belt. Do not use the treadmill with a damaged or worn out power cord.
●Unplug before cleaning or engaging in maintenance work. Maintenance should only be
done by authorized service technicians, unless otherwise stated by the manufacturer.
Ignoring those instructions would automatically void the warranty.
●Inspect the treadmill before every use to make sure that every part is operational.
●Do not use the treadmill outdoors, in a garage or under any kind of canopy. Do not
expose the treadmill to high humidity or direct sunlight.
●Never leave the treadmill unattended.
Make sure the striding belt is always tense. Start the striding belt before stepping on it.
40