Techness RUN1000 Mode D'emploi page 39

SETTING UP YOUR TREADMILL
1. FOLDING/UNFOLDING & MOVING THE TREADMILL
FOLDING &UNFOLDING THE TREADMILL:
1. Unplug from power point before folding
2. Lift deck until it's parallel to the upright post
3. Check the cylinder locks into right position
4. Place two hands on handle bar, and Press one foot on the middle section of the
cylinder to dis-engage the locking mechanism. Both hands press down, and the base
frame can down slowly. Then take off both hands, the deck can down itself.
MOVING THE TREADMILL:
5. Before moving, make sure the power is off.
6. Make sure the plug has pulled off.
7. Make sure the running base has been folded
4. The treadmill can be moved around in house safely in its fold-up position by using the
transport wheels. Firmly hold onto handle bars with both hands, pull the treadmill
towards you, incline 30-40 degree until it's portable on wheels, drag or push slowly .
All manuals and user guides at all-guides.com
Joint & Check Valve
39
Soft drop