Technical Data; Plug And Socket Ghg 515 - Eaton Crouse-Hinds CEAG GHG 515 Mode D'emploi

Code Zone 1
3-pole + PE 3-pole +N + PE
GHG 515, 4-pole 50/60Hz
220-250V 380-415V 500V
blue red black
GHG 515, 5-pole 50/60Hz
220-250V 380-415V 500V
blue red black
Dimensions in mm
X = fixing dimensions
Wall socket
Explosion-protected plugs and sockets 125 A, GHG 515
1

Technical data

1.1

Plug and socket GHG 515

Marking acc. to 94/9/EC:
EC type examination certificate:
Rated voltage:
Rated current:
Back-up fuse:
Switching capacity AC 3:
Perm. ambient temperature:
Other temperatures possible for special versions.
Perm. storage temperature in original packing:
**Protection category acc. to EN/IEC 60529
with closed and secured hinged cover as well
as combinations properly plugged together
Insulation class acc. to EN/IEC 61140:
Cab,le entry:
690V
Wall socket
black
suitable cables and test torques of the
pressure srew
seel 1+2
1 2
seel 2
1 2
Test torque for screw in thread cable entry
(1)
The maximum clamping area for cables with the seal combination 1+2 can vary according to the type
of cable used.
(2)
When selecting the seal rubber, ensure that the pressure screw can be tightened when carrying out any
690V
future maintenance work on the cable entry.
black
Plug
Terminal:
Wall socket
Plug
* (use cable lugs supplied) Observe current load !
Min. cross section / Supply terminal
for 100A rated current
for 125A rated current
Test torques:
Cover screws
Terminals, plug
Terminals, wall socket
Self-cutting screws size 5
Weight (standard version):
Wall socket
Plug
Auxiliary contact:
Rated voltage:
Rated current:
Switching capacity:
EATON's Crouse-Hinds Business
D II 2 G Ex de II C T6
D II 2 D Ex tD A21 IP66 T 80°C**
PTB 01 ATEX 1069
up to 690 V, 50/60 Hz
max. 125 A
max. 125 A gL without thermal protection
max. 160 A gL with thermal protection (therm.
protection set to 125A)
up to 690 V / 125 A
-20° C to +40° C (standard version)
-20° C to +40° C
IP 66 (catalogue version)
I - is complied with by devices
(standard version)
2 x M63 (Ø 29- 41 mm)
Ø
min. 29.0
(1)(2)
max. 35.0
min. 36.0
(2)
max. 41.0
7 .5 Nm
Ø 21-48 mm (Ø 31-58 mm)
2 x 4 - 70 mm² (max 1x120 mm²)*
1 x 4 - 35 mm² with pin cable lugs 1x50mm²
Wall socket
1x 50 mm²
1x 70 mm²
2.5 Nm
4.5 Nm
6.0 Nm
3.0 Nm
4-pole
ca. 12.30 kg
ca. 0.90 kg
690 V AC
20 A
AC 15
DC 13
Contact arrangement
4-pole
5-pole
w/o auxiliary contact
Plug
Nm
12.0
12.0
12.0
13.0
Plug
1x 35 mm²
1x 50 mm²
5-pole
ca. 13.00 kg
ca. 1.20 kg
400 V / 6 A
24 V / 2 A
with auxiliary contact
GB
7