Listening To Station Presets; Changing The Frequency Step - Pioneer HTS-560DV Mode D'emploi

07 Listening to the radio

Listening to station presets

1 Make sure the tuner function is selected.
2 Use the SHIFT+ ST +/– buttons to select a station
preset.
• Alternatively, hold down SHIFT and use the number
buttons to select a preset directly.

Changing the frequency step

If you find that you can't tune into stations successfully,
the frequency step may not be suitable for your country/
region.
1 Switch the system into standby.
2 Press SHIFT+ SETUP .
3 Use the SHIFT+
select 'AM 9K/10K', then press SHIFT+ ENTER .
4 Use the SHIFT+
select a setting then press SHIFT+ ENTER to confirm.
• AM 9K – 9 kHz step for AM;
50 kHz step for FM
• AM 10K – 10 kHz step for AM;
100 kHz step for FM
26
En
(cursor left/right) buttons to
(cursor up/down) buttons to