Improving Poor Fm Reception; Memorizing Stations; Listening To Station Presets; Listening To Other Sources - Pioneer XV-DV250 Mode D'emploi

Getting started
2 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
• High-speed tuning: Press and hold TUNE
+/– until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.

Improving poor FM reception

If you're listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1 Tune to an FM radio station then press
SHIFT+SYSTEM SETUP .
2 Use (cursor left/right) to choose FM
MODE then press ENTER .
3 Use (cursor up/down) to select FM
MONO then press ENTER .
The mono indicator ( ) lights when the tuner
is in mono reception mode.
Select FM AUTO above to switch back to auto-
stereo mode (the stereo indicator (
when receiving a stereo broadcast).

Memorizing stations

You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
All manuals and user guides at all-guides.com
2
3
'ST.MEM.' then press ENTER .
4
station preset you want then press ENTER .

Listening to station presets

1
2
preset.

Listening to other sources

You can connect an external audio source (TV,
satellite receiver, etc.) to this system. See
Connecting auxiliary components on page 24.
1
satellite receiver, etc.) is switched on.
2
3
) lights
Press SHIFT+SYSTEM SETUP .
Use (cursor left/right) to choose
Use (cursor up/down) to select the
Make sure the TUNER function is selected.
Use the ST +/– buttons to select a station
• You can also use the number buttons to do
this.
FM/AM
DVD/CD TUNER
Make sure that the external source (TV,
Press LINE to select the source.
If necessary, start playback of the source.
01
LINE
En
9