Wall Mounting The Display Unit; Using This System For Tv Audio - Pioneer HTS-560DV Mode D'emploi

Connecting up
TV
P
B
COAXIAL
DIGITAL
AUDIO OUT
HDMI
OUT
P R
S-VIDEO OUT COMPONENT VIDEO OUT

Wall mounting the display unit

It is possibe to mount the display unit on the wall.
Before mounting:
• Remember that the display unit is heavy and could
cause the wood screws to work loose, or the wall
material to fail to support it, resulting in the display
falling. Make sure that the wall you intend to mount
the display on is strong enough to support it. Do not
mount on plywood or soft surface walls.
• Mounting screws are not supplied. Use screws that
are suitable for the wall material and that will support
the weight of the display.
• Pioneer bears no responsibility for accidents resulting
from faulty assembly or installation, insufficient
mounting strength of walls or other building fixtures,
misuse or natural disasters.
• If you are unsure of the qualities and strength of the
wall, consult a professional for advice.
27
5 /
32
148.5 mm
Mounting screw
(not supplied)
3/32 in./ 2.5 mm
A/V IN
7
White
VIDEO OUT AUDIO OUT
L
R
L
R
Y
Red
Yellow
in.
5/32 in.
4 mm
3/8 in.
10 mm
8

Using this system for TV audio

If your TV has a stereo audio output you can connect it to
this system and enjoy surround TV sound.
CONTROL SPEAKERS
DVD
SYSTEM CONNECTOR
OUT SUB WOOFER R SURROUND L
(COAXIAL)
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
CENTER R FRONT L
AC IN
1 Connect the AUDIO OUTPUT jacks on your TV to the
AUX AUDIO INPUT jacks on the receiver subwoofer.
Use the red/white stereo audio cable (not supplied) for
this connection. Make sure you match the left and right
outputs with their corresponding inputs for correct
stereo sound.
• You can use the AUX input jacks for any analog
source you want, such as a tape deck, etc.
DVD player (DV-490V-S)
To AC outlet
AUDIO INPUT
DIGITAL ANALOG
DTV PC/GAME AUX
(OPTICAL) (OPTICAL)
L
R
1
AUDIO
OUTPUT
TV
02
13
En