Hood Calibration - AEG Electrolux DH1690-M Notice D'utilisation

All manuals and user guides at all-guides.com
Installing the hood
32

Hood calibration

After the hood has been installed, the aspiration panel must be calibrated.
This operation is necessary to regulate the power exstraction of the aspiration
panel. Connect the product to the power line, making sure that it is
conformed to the supply voltage indicated on the technical data tag.
Pushing the ON/1 the aspiration panel rises. After it has reached a height of
18 cm from the cooktop, press OFF, to stop the extraction then the Timer
(fig.11F) and after sec. the OFF button.
The hood will carry out the calibration of its aspiration panel rising and retracting
for some centimeters.
During this phase, the buttons on the pushbutton control panel blink.
fig.11