Avtek TT-BOARD 3000 Notice D'utilisation page 14

All manuals and user guides at all-guides.com
3. Connecting the whiteboard
1. Prepare (mount) the whiteboard.
2. Dopasować pozycje tablicy i projektora.
3. In the lower-left corner of the board (looking at the front) there is a cable with a female USB tip.
Connect one end of the included USB cable to the cable suspended from your interactive whiteboard.
When connecting the whiteboard to the computer using the USB cable, secure the cable in order to
minimize the risk of the cable being accidentally pulled out (e.g. when walking by).
It is recommended to use the original USB cable supplied with the whiteboard (should you use another
cable, make sure its resistance is below 0.5 Ω).
4. Connect the other end of the USB cable to your computer.
5. Connect your computer to the projector (see the projector instruction manual for more details).
12