Every Week; When You Begin Your Work - Clarke Ultra Speed 20 Manuel D'utilisation

MAINTENANCE
These Maintenance Procedures Must Be Done Every
Week:
WARNING: Maintenance and repairs must be
done by authorized personnel only.
Keep all fasteners tight.
CAUTION: To prevent damage to the machine,
and discharge across the tops of
the batteries, do not fi ll the batteries
above the bottom of the tube in each
cell. Wipe any acid from the ma-
chine or the tips of the batteries. Do
not add acid to battery after installa-
tion.
WARNING: Always wear eye protection and pro-
tective clothing when working near
batteries. Do not put tools or other
metal objects across the battery
terminals or the tops of the batteries.
NO SMOKING!
1. To inspect batteries, remove battery cover.
2. Disconnect the batteries. Use a cloth and a solution
of ammonia or bicarbonate of soda to wipe the top of
the batteries. Clean the battery terminals. Recon-
nect the batteries.
3. Check dust bag and install new one if necessary.
WARNING: Maintenance and repairs must be
done by authorized personnel only.
WARNING: Keep all fasteners tight.
Keep the machine clean, it will need fewer repairs and
have longer life
Do These Procedures When You Begin Your Work
Period
1. Make sure the pad housing and skirt are in correct
position.
2. Make sure the pad is installed correctly.
3. Check the pad and pad driver for damage.
®
Clarke Operator's Manual (EN) - Ultra Speed 20 / 20T
®
ENGLISH
EN
FORM NO. 56091104 - 13 -