How To Operate The Machine - Clarke Ultra Speed 20 Manuel D'utilisation

ENGLISH
EN

HOW TO OPERATE THE MACHINE

How To Operate the Ultra Speed 20 (non-traverse)
1. Turn the key switch "ON".
2. When either pad power switch ( 1 - fi gure 9) is pushed
in, the pad motor will start.
3. Push the machine forward and guide it with the control
handles.
4. To reverse the direction, stop the machine by pulling
back on the control handles and then pulling the ma-
chine backwards.
5. When you stop the machine, be sure to turn the key
switch off .
How To Operate the Ultra Speed 20T (traverse)
1. Turn the key switch "ON".
2. Turn the pad power switch on (1 - fi gure 10).
3. When either the right or left pad/traverse switch (2 -
fi gure 10) is pushed in, the pad motor will start and the
traverse motor will propel the machine forward.
4. Control the speed of traverse by using the speed con-
trol knob (3 - fi gure 10).
5. To stop, release the pad/traverse switch.
6. To reverse the machine, push in the traverse reverse
switch (4 - fi gure 10) and either the right or left pad/tra-
verse switch (2 - fi gure 10) at the same time.
7. To stop, release the pad/traverse switch.
8. When you stop the machine, be sure to turn off the key
switch.
-10- FORM NO. 56091104
1
Figure 9
4
2
Figure 10
®
Clarke Operator's Manual (EN) - Ultra Speed
1
3
2
1
20 / 20T
®