SilverCrest SND 3600 D2 Mode D'emploi page 45

Troubleshooting
The following table will help you to identify and rectify minor
malfunctions:
Fault
PWR LED does
not light up.
Poor image quality.
The scanned images
are blurred.
NOTE
► If the above-mentioned solutions do not resolve the problem,
please contact Customer Service (see section Service).
SND 3600 D2
All manuals and user guides at all-guides.com
Possible cause
The device is not
correctly connected.
Dust on the scanner's
background lighting.
Dust on the film/slide.
The lens of the scanner
has fogged up due to
temperature differences.
Remedy
Connect the device.
Clean the back-
ground lighting (see
section "Cleaning").
Clean the film/slide.
Wait until the device
has acclimatised to
room temperature.
GB │ IE │
41 ■