hajdu C50S Guide De Montage Et D'utilisation page 36

C50S • C80S • C120S • C150S • C200S
Symbol
protection
Time/program
Manual
Programmed
8.5.
Manual mode
You can set the desired water temperature manually using the left/right arrows
within the range of 40°C to 75°C. (For energy eiciency, the unit does not restart
heating after heat-up, until the water temperature has dropped a few degrees be-
low the set value.)
To set the desired water temperature:
1. If keylock is on, unlock keys by pressing and holding the
2. Touch the key
3. The set temperature value flashes.
4. Set the desired temperature by pressing the
5. The set temperature value is activated either on touch of the
automatically after a few seconds.
8.6.
SMART mode
In this mode, hot water production is aligned automatically to the user's needs af-
ter the learning phase (1 week) with the help of the unit's self-learning capability.
The user can select the desired comfort level. Setting a higher value will result in
greater comfort (higher average water temperature) but higher energy consump-
tion as well.
36
Mode
Heating until the temperature set by the user is reached.
Manual
The unit heats up water according to the user habits learned.
sMArT
In frost protection mode, the unit prevents water temperature
Frost
from dropping below 4°C.
It enables to set the time and the periods assigned to the
„programmed heating" timer mode.
setting
Manual Manual
Heating
enabled in of-
heating
peak periods
Program setting
to select the temperature.
Description
sMArT
or
sMArT
Heating
enabled in of-
peak periodsl
key.
key.
jkey, or
Frost
protection