hajdu C50S Guide De Montage Et D'utilisation page 27

Chauffe-eaux à circuit fermé rectangulaire avec cartouche chauffante en céramique et commande smart
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

category III (min. 3 mm gap between open contacts). The
isolation device must be incorporated in the fixed wire
network.
• If the mains cable is damaged, it must be replaced in order to
avoid any danger. Such replacement must be performed by
the manufacturer, its service support or a similarly qualified
professional.
• The first heating cycle must be supervised by a professional.
• The electrical safety cover may not be removed, but by a
professional; failure to observe this may lead to electrical
shock or other dangers.
• To ensure safe operation it is recommended to regularly
(every year) have the appliance and the combined safety
valve checked by a qualified professional for proper
operation. Additionally, it is also recommended to blow of
the valve every two months by turning the blow of button of
the safety valve in the direction indicated by the arrow. This
way, the valve seat will be cleaned of any possible deposit
(scale, sand grains etc.).
SERVICING
For regular inspections or if the appliance fails, contact one of our
authorized local HAJDU service partners, whose list is available in the List
of Service Stations supplied with the product or on our corporate website:
Please, contact our customer service, should you have any question or
issue related to our appliances or service stations.
Contact details of our customer service:
Email: customerservice@hajdurt.hu
ENVIRONMENTAL PRECAUTIONS
Please, note that, due to its decomposition attributes, the product you
purchased may damage the environment, and in particular the soil and
ground water after its useful lifecycle, given that it contains parts (e.g.
wires), for which the product is considered hazardous waste. Please, when
reaching the end of service life, do not dispose of the product along with
the communal waste, but arrange for its transportation to a company
collecting electrical wastes or the manufacturer. By taking measures for
the proper processing or recycling of the product after its useful lifecycle,
we may promote together the protection of the environment.
EN
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

C80sC120sC150sC200s2111614811

Table des Matières