Waste Water (Drain Valve); Securing The Machine; Fasteners; Emissions - Miele PW 6241 EL Schéma D'installation

en - Technical details

Waste water (drain valve)

Maximum waste water temperature
Machine-side drain connection (external diameter)
On-site drain (internal diameter)
Maximum flow rate
A vented combined pipe is required to drain the waste water. If several machines are connected to a single drain pipe, this should be
sufficiently large to allow all machines to drain simultaneously.

Securing the machine

Fasteners

4 x wood screws DIN 571 (Ø x length)
4 x plugs (Ø x length)
Fixing the machine in place is absolutely essential.

Emissions

Average heat dissipation rate to installation site
A-weighted noise power level in accordance with EN ISO 9614, part 2
Sound power level, washing
Sound power level, spinning

Appliance data

Appliance width (without add-on components)
Appliance height (without add-on components)
Appliance depth (without add-on components)
Appliance width, total
Appliance height, total
Appliance height, total
Minimum width of loading aperture (internal width)
Recommended wall spacing up to the front edge of the appliance
Net weight
Maximum floor load in operation
Maximum static load
Maximum dynamic load
Maximum rotation frequency of drum

Transport data

Packaging width
Packaging height
Packaging depth
Gross weight
16
203°F (95°C)
HT DN 70 (2 15/16")
2 15/16" x 13/16" x 4 5/16" (75 x 1.9 x
110 mm sleeve DN 70)
52.8 gpm (200 l/min)
12 mm x 90 mm
16 mm x 80 mm
78 dB(A) re 20 µPa
60.3 dB (A) re 1 pW
82.2 dB (A) re 1 pW
42 3/4" (1085 mm)
64 11/16" (1643 mm)
43 9/16" (1106 mm)
42 7/8" (1089 mm)
64 13/16" (1646 mm)
51 1/2" (1308 mm)
46 5/8" (1185 mm)
70 7/8" (1800 mm)
1521 lb (690 kg)
49 5/8" (1260 mm)
67 5/16" (1710 mm)
57 7/8" (1470 mm)
1631 lb (740 kg)
4.7 MJ/h
8417 N
7063 N
1353 N
18.3 Hz