Kettler ERGOCOACH Instructions De Montage page 4

Assembly Instructions
GB
replacement of original parts) may endanger the safety of the
user.
Damaged components may endanger your safety or reduce the
I
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
If the equipment is in regular use, check all its components
I
thoroughly every 1 – 2 months. Pay particular attention to the
tightness of bolts and nuts.This applies especially to the secu-
ring bolts for saddle and handelbar.
To ensure that the safety level is kept to the highest possible
I
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
Instruct persons using the equipment (in particular children) on
I
possible sources of danger during exercising.
The unit requires a power supply of 220-230 V/50 Hz. It
I
should be connected only to a safety socket with a single 10-A
fuse. Before commissioning the appliance pay attention to the
fact that the correct plug-in power supply unit (observe mar-
king) has been connected properly.
Important: Do not under any circumstances carry out electrical
I
repairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
Important: disconnect the apparatus from the mains before
I
doing repair, maintenance or cleaning work.
Do not use a multiple power socket for the running belt. If an
I
extension cable is being used, ensure that it complies with the
Handling the equipment
Before using the equipment for exercise, check carefully to en-
I
sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp
I
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
The machine is designed for use by adults and children should
I
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
The unit complies with the EN 975-1, -7, class HA.
I
Before beginning your first training session, familiarize yourself
I
thoroughly with all the functions and settings of the unit.
Instructions for Assembly
Ensure that you have received all the parts required (see check
I
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
I
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
I
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
Please note that there is always a danger of injury when wor-
I
king with tools or doing manual work. Therefore please be ca-
4
VDE regulations.
When the unit is not in use, unplug it from the power supply.
I
Ensure that the power cable is not pinched and that no-one can
I
trip over it.
All electric appliances emit electromagnetic radiation when in
I
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
Before beginning your program of exercise, consult your doc-
I
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
Any interference with parts of the product that are not descri-
I
bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be car-
ried out by KETTLER service staff or qualified personnel trained
by KETTLER.
Always observe the general safety rules and precautions for
I
working with electrical equipment.
Before beginning your program of training, study the instruc-
I
tions for training carefully.
Our products are subject to a constant innovative quality assu-
I
rance. We reserve the right to perform technical modifications.
In case of enquiry, please contact your KETTLER dealer.
I
Attention! The unit should be positioned in such a way that the-
I
re is a space of 100 cm on both sides and 150 cm behind it.
A slight production of noise at the bearing of the centrifugal
I
mass is due to the construction and has no negative effect upon
operation.
The unit has a magnetic brake system.
I
The equipment is dependent of revolutions per minute.
I
Please ensure that liquids or perspiration never enter the ma-
I
chine or the electronics.
Before use, always check all screws and plug-in connections as
I
well as respective safety devices fit correctly.
Always wear suitable shoes when using.
I
Use for your regular cleaning, maintenance and care our ap-
I
pliance maintenance set (Article no. 07921-000) specifically li-
censed for KETTLER Sports apparatus and available from the
Sport specialized trade.
reful when assembling this machine.
Ensure that your working area is free of possible sources of dan-
I
ger, for example don't leave any tools lying around. Always dis-
pose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
The fastening material required for each assembly step is sho-
I
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they
I
have been assembled correctly. Tighten the locknuts by hand un-