Baby Jogger City Select 2 Instructions D'assemblage page 16

49 Align the black attachment brackets
EN
of the deluxe carrycot 2 body with the
pushchair attachment brackets. The
carrycot body can only be attached
rear facing. Firmly press down on the
carrycot body until you hear it click into
place. Gently pull up on the carrycot
body to ensure it is locked in place.
Carrycot can be attached to either the
bottom or top mount. .
50 Align the infant car seat attachment
points with the pushchair attachment
brackets as shown. Firmly press down
on the infant car seat until you hear it
click into place. Gently pull up on the
infant car seat to ensure it is locked in
place. Infant car seat can be attached
to either the bottom or top mount. .
CARE AND MAINTENANCE
To preserve the longevity of your
pushchair, it is important to perform
simple, regular maintenance. From time
to time, make sure that the joints and
folding areas are still in good condition. If
you hear any squeaking or feel tension,
you can take your pushchair to a local
bike shop for added lubrication. All
repairs should only be carried out by an
authorized dealer.
WASHING
Seat Fabric/Canopy/Basket
• Refer to your care tag on the seat
pad, canopy, and basket for washing
instructions.
- Wipe clean with damp cloth
- Machine wash separate in
cold water, delicate cycle
• Do not use solvents, caustic or abrasive
cleaning materials.
• Do not press, iron, dry clean, tumble
dry or wring the fabric.
• If the seat covers need to be replaced,
only use parts from a Baby Jogger
Authorized Dealer. They are the only
ones that are guaranteed to have been
safety tested and designed to fit this
seat.
Do not use lower bracket for seat or
double seat configurations.
51 USE POSITIONS (accessories sold
separately)
52 USE POSITIONS with glider board
(accessories sold separately)
*
Position may not be compatible with
all infant car seat models. Please refer
to your infant car seat adapter manual
+
to confirm compatibility.
Do not use lower bracket for seat or
double seat configurations. Only use
lower bracket when attaching one
carry cot or car seat.
Plastic/Metal Parts
• Wipe clean using a mild soap and
warm water.
• You must not remove, dismantle
or alter any part of the seat folding
mechanism or brakes.
Wheel Care
• The wheels can be cleaned using a
damp cloth. They will need to be dried
completely with a soft towel or cloth.
STORING
• Sunshine can fade seat fabric and dry
out tyres, so storing your pushchair
indoors will prolong its good looks.
• DO NOT store outside.
• Ensure that the pushchair is dry before
storing for prolonged periods.
• Always store the pushchair in a dry
environment.
• Store the pushchair in a safe place
when not in use (i.e. where children
cannot play with it).
• DO NOT place heavy objects on top of
the pushchair.
• DO NOT store the pushchair near a
direct heat source such as a radiator or
fire.
16