Siemens EQ.700 classic TP7 Serie Manuel D'utilisation page 11

Environmental protection and saving energy
2 Environmental protec-
tion and saving energy
Environmental protection and saving energy
2.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
2.2 Tips for saving energy
If you follow these instructions, your
appliance will use less power.
Set the interval for automatic switch-
off to the smallest value.
a If the appliance is not being used,
it will switch itself off earlier.
→ "Basic settings", Page 20
Do not interrupt the dispensing pro-
cess prematurely.
a The amount of water or milk that is
heated is used optimally.
Descale the appliance regularly.
a Limescale deposits increase the
appliance's energy consumption.
Installation and connection
3 Installation and con-
nection
You can find out where and how best
Installation and connection
to install your appliance here. You
will also learn how to connect your
appliance to the power supply.
Environmental protection and saving energy en
3.1 Scope of delivery
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
Note: Different accessories are en-
closed depending on the appliance
model. This accessory is shown in a
frame with a dashed line.
→ Fig.
1
Fully automatic coffee ma-
A
chine
Milk tube and suction pipe
B
Instruction manual
C
Insertion aid for water filter
D
Descaling tablets
E
Cleaning tablets
F
Water filter
G
Water hardness testing strip
H
Microfibre cloth
I
1
Depending on the appliance spe-
cifications
3.2 Installing and connecting
the appliance
ATTENTION!
Risk of damage to the appliance. If
the appliance is not started up cor-
rectly, it may be damaged.
Use the appliance in frost-free
▶
rooms only.
If the appliance has been transpor-
▶
ted or stored below 0 °C, wait
3 hours at room temperature be-
fore starting it up.
After plugging in, always wait ap-
▶
prox. 5 seconds.
1
1
1
11